THM Fleet Tools

Firmware flasher

← Home

Flash over USB

Install firmware on your ESP8266

Flash the latest THM firmware to a NodeMCU v2 board directly from your browser. No tools to install.

Browser not supported. Use Chrome, Edge or Opera on desktop. Web Serial requires HTTPS or localhost.
  1. 1Connect the board via USB (install the CH340 / CP210x driver if no port appears).
  2. 2Click Connect & flash and choose the serial port.
  3. 3After flashing, join the device's WiFiManager access point to configure WiFi.

Firmware file: firmware/firmware.bin (PlatformIO nodemcuv2 build, flashed at offset 0). Build with pio run -e nodemcuv2 and copy it from .pio/build/nodemcuv2/.